Bel Canto Phono

Phono Preamplifier
Manufacturer: Bel Canto
Availability: In stock
Manufacturer part number: Bel Canto Phono
Free shipping
*
£1,500.00

The Bel Canto Phono is a compact phono pre-amplifier. Designed as a stand alone Phono Pre Amp to get the most for your Turntable. MM and MC loading with switches for Gain and Resistance. All this in Bel Canto's beautiful casework. Available in Black or Silver. 

 

The PHONO preamp will unleash tremendous dynamics and resolution to your listening experience.

 

  • Optimized two stage architecture
  • Low noise 40dB input stage
  • Custom discrete output stage with adjustable gain
  • Precision RIAA network
  • High drive output buffer
  • Low noise multi-stage channel independent power supply
  • Ground optimized PCB layout

DSSA, Discreet Single Stage Amplifier
This is a very fast, low noise amplifier with a single-stage folded cascode architecture and over 500mA of peak current output capability. It maintains very low constant distortion levels through the audio band because of its high open-loop bandwidth. The DSSA module brings a further element of dynamic resolution and contrast to the e.One Phono. The vertical modular design permits a tight, efficient Printed Circuit Board (PCB) layout that combines the best of IC based and discrete component design.

Gain and Resistance Customization
The PHONO can work with a wide variety of cartridges by adjusting the dip switches for gain and resistance on the back of the unit.

Bandwidth: 1Hz-50KHz
RIAA Accuracy: 20Hz-20KHz +/- 0.2 dB
Signal to Noise Ratio 40 dB gain: >80 dB A weighted, re 5mV RMS in
Distortion @ 2 Volt RMS/1KHz: <0.01%
Input Impedance: Adjustable 31 to 47k (View dip switch alignment)
Gain Level Options: Adjustable 38dB to 60dB (View dip switch alignment)

General:

Power On usage: 10W
Power Off usage: 0.0W
Internally Set Operating Voltages: 100-120VAC or 230-240VAC 50/60 Hz
Size: 8.5 x 3.5 x 12?, 216 x 88 x 305mm (W x H x D)
Weight: 10lbs, 4.5Kg

 

Products specifications
Item Condition New