The new Dali Alteco C 1 is a multi positional, Up or Down firing Height Speaker specifically designed for Dolby Atmos or DTS-X Home Cinema Systems. Available in Black, White or Walnut, these discreet speakers can be mounthed high up in a corner, pointing into the room, or placed on top of an exisiting speaker at the front or rear. Both options give you the height channels required to run a true Dolby Atmos AV system.
DUAL SOUND MODE
The unique angular design combined with the dual sound mode enables this speaker to be used in a multitude of different scenarios. Choose 'UP' on the front baffle switch to beam the sound waves either straight out for a soft downwards angle, or by selecting 'DOWN', beaming the sound almost straight down for close position listening.
The angular design of this speaker makes it perfect for up-firing use. Combined with a surround receiver that has the ability to render height information (Dolby Atmos, DTS-X or Auro-3D), placing it on top of the front speakers, and even on top of the rear speakers will offer an excellent ceiling reflected rendering of height information in compatible movies and concerts.
WOOD FIBRE CONES
Our low-loss drivers uses a mix of low-mass paper cones with wood fibre reinforcement. The embedded wood fibres give the surface an uneven structure, which dramatically minimizes the resonance of the surface. This creates the best possible reproduction of every detail in the audio signal.
LOW SIGNAL LOSS
By using only DALI designed and custom-built drivers, the need for frequency correction in the crossover is eliminated. This enables us to design an exact crossover which together with carefully selected quality components ensures that the signal loss is close to zero.
DALI ALTECO C-1 SPECS
|Frequency Range (+/-3 dB) [Hz]
||74 - 25,000 Hz
|Sensitivity (2,83 V/1 m) [dB]
|Nominal Impedance [ohms]
|Maximum SPL [dB]
|Recommended Amplifier Power [W]
||40 - 100 Watt
|Crossover Frequency [Hz]
|High frequency driver, Quantity
||1 x 21 mm
|High frequency driver, Diaphragm type
||Soft Textile Dome
|Low frequency driver, Quantity
||1 x 4.5"
|Low frequency driver, Diaphragm type
||Wood Fibre Cone
||Single Wire (Spring loaded push button)
|Recommended Distance From Wall [cm]
||1 - 100 cm
|Dimensions (HxWxD) [mm]
||265 x 160 x 200